Analysis Of A 1.7500-g Sample OfPepto-Bismol Yields 346 Mg Of Bismuth. What Percent Bymass Is Bismuth (2024)

This question involves the concepts of de Broglie's wavelength and momentum.

The velocity of the electron must be "1754.27 m/s".

de Broglie's wavelength is a wavelength associated with a moving matter particle. It is connected to the momentum of the particle by the following formula:

[tex]P =\frac{h}{\lambda}\\\\mv=\frac{h}{\lambda}\\\\v=\frac{h}{m\lambda}\\\\[/tex]

where,

v = velocity of electron = ?

h = Plamk's Constant = 6.625 x 10⁻³⁴ J.s

m = mass of electron = 9.1 x 10⁻³¹ kg

λ = de Broglie's wavelength = 415 nm = 4.15 x 10⁻⁷ m

Therefrore,

[tex]v=\frac{6.625\ x\ 10^{-34}\ J.s}{(9.1\ x\ 10^{-31}\ kg)(4.15\ x\ 10^{-7}\ m)}[/tex]

v = 1754.27 m/s

Learn more about de Broglie's wavelength here:

https://brainly.com/question/20339737?referrer=searchResults

Answer:

1 to 5 days

Explanation:

Answer:

0.5 m/s²

Explanation:

The acceleration of an object given it's mass and the force acting on it can be found by using the formula

[tex]a = \frac{f}{m} \\ [/tex]

f is the force

m is the mass

From the question we have

[tex]a = \frac{5}{10} = \frac{1}{2} = 0.5 \\ [/tex]

We have the final answer as

0.5 m/s²

Hope this helps you

When the mixture of ions undergoes electrolysis, Br- is most easily oxidized.

Electrolysis refers to the decomposition of a solution by the passage of direct current through it. During electrolysis, a specie is oxidized and another specie is reduced since it is a redox reaction.

Among all the ions; Mg2+ , Cu2+ ,F-, Cl-, Br-, the ion that is most easily oxidized in Br- which is oxidized to Br2.

Learn more: https://brainly.com/question/12054569

The bond strength for lithium bonded with any of the anions is larger than the bond strength of potassium bonded with any of the same anions because lithium is the smallest cation, so bond length is shorter creating a tighter bond.

The strength of an ionic bond ultimately depends on the size of the ions. The smaller the ions the stronger the bond and the higher the lattice energy. Such compounds having a high lattice energy tend to deviate from the normal behavior of ionic crystals due to significant covalent contribution.

Lithium is the smallest cation in group 1. Hence, the bond strength for lithium bonded with any of the anions is larger than the bond strength of potassium bonded with any of the same anions because lithium is the smallest cation, so bond length is shorter creating a tighter bond.

Learn more: https://brainly.com/question/2815368

Answer:

The actinides and the lanthanides

Answer:

Test for carbon dioxide gas.

The reaction between baking soda and citric acid will form sodium ions, citric acid ions, carbon dioxide gas, and water. So all you have to do is add the gas produced (by gas displacement method or something) and test whether the gas is carbon dioxide, with lime water or other methods like hydrogencarbonate indicator. Hope this helped!

Explanation:

Answer:

depends on amount, but the reaction's endothermic (meaning its cold, absorbs heat from surroundings)

I hope it helps.

Answer:

They cannot be broken down any further

Explanation:

An element is a substance that cannot be broken down into a simpler format. They are distinguished by a unique atomic number. The elements are organized by their atomic number in the periodic table, which highlights elements with similar properties.

Answer:

[tex]\implies \sf D = \dfrac{PM}{RT}[/tex]

[tex]\implies \sf 3.35= \dfrac{1 \times M}{ \frac{1}{12} \times 298}[/tex]

[tex]\implies \sf 3.35= \dfrac{12\times M}{ 298}[/tex]

[tex]\implies \sf 3.35 \times 298= 12\times M[/tex]

[tex]\implies \sf 998.3= 12\times M[/tex]

[tex]\implies \sf M = \dfrac{998.3}{12} [/tex]

[tex]\implies \bf M = 83.1917 \: \frac{g}{mol} [/tex]

Answer:

oxygen are covalent bonds because they require 2 more electrons to obtain their octet shell

so when they combine with any other element, they form a covalent bond

Explanation:

Oxygen requires two shared electrons to fill its outermost shell therefore to covalent bonds form.

Answer: 5. Positive

6. Negative

9. Oxygen carbon hydrogen nitrogen

Explanation:

A disadvantage of disposing of waste polymers through recycling is that

they must first be separated.

Recycling is the process of forming new polymers and compounds as against their disposal .

Recycling involves separating the items into various sections such as paper,

plastic , metal etc. This is because they both undergo different recycling

processes.

The disadvantage of this process is that it's time consuming and also

expensive as a great amount of time and man power is needed to

separate the waste items.

Read more on https://brainly.com/question/24643504

The products of the reaction are Zinc chloride (ZnCl₂) and Hydrogen gas (H₂)

From the question,

We are to determine the product or products when zinc (Zn) reacts with hydrochloric acid (HCl)

To determine the product or products, we will write the chemical equation for the reaction.

The balanced chemical equation for the reaction is

Zn + 2HCl → ZnCl₂ + H₂

Hence, the products of the reaction are Zinc chloride (ZnCl₂) and Hydrogen gas (H₂)

Learn more here: https://brainly.com/question/17716543

Imagine A represents a heterogeneous mixture as it is a mixture composition that does not remain the same throughout the mixture whereas Imagine B represents a hom*ogeneous mixture as it does not have any change or irregularity.

What are hom*ogenous and Heterogenous mixtures?

A hom*ogeneous mixture is defined as having a fairly uniform form and composition, so many hom*ogeneous mixtures are referred to as solutions whereas heterogeneous mixtures are defined as separate substances or phases. The three states or states of matter are gas, liquid and solid.

Some examples of mixtures that include mixtures of sand and water, mixtures of sugar and salt, and mixtures of lime juice and water.

In hom*ogenous solution, particles are distributed uniformly and have uniform composition while in heterogenous solution, particles are distributed non-uniformly and have non-uniform composition

Thus, Imagine A represents a heterogeneous mixture as it is a mixture composition that does not remain the same throughout the mixture whereas Imagine B represents a hom*ogeneous mixture as it does not have any change or irregularity.

Learn more about hom*ogenous mixture, here:

https://brainly.com/question/24898889

SPJ2

The pressure of this gas in atm is equal to 1.63 atm.

Given the following data:

Number of moles = 0.742 moleVolume = 10.91 LitersTemperature = 291 KIdeal gas constant, R = 0.0821 Latm/molK

To calculate the pressure of this gas, we would use the ideal gas law equation;

[tex]P=\frac{nRT}{V}[/tex]

Where;

P is the pressure.V is the volume.n is the number of moles of a gas.R is the ideal gas constant.T is the temperature.

Substituting the given parameters into the formula, we have;

[tex]P=\frac{0.742 \times 0.0821 \times 291}{10.91} \\\\P = \frac{17.73}{10.91}[/tex]

Pressure, P = 1.63 atm.

Read more: https://brainly.com/question/25706436

Answer:

What Questions?

Explanation:

What Questions?

Answer:

Explanation:

What is the Questions frist ?

Answer:

Explanation:

All the stars we see in the night sky are in our own Milky Way Galaxy. Our galaxy is called the Milky Way because it appears as a milky band of light in the sky when you see it in a really dark area.

Answer: it is

Explanation: A galaxy is a system of millions or billions of stars, together with gas and dust, held together by gravitational attraction, plus there are 100 billion planet in it.

Answer:

ionic salt MX2

Explanation:

Atoms from an element in group IIA are allowed to react with atoms from an element in group VIIA. What type of compound is likely to form

elements from IIA are alkali earth metals (M) and need to lose

2 e^1- to become stable as M^2+

elements from VIIA ar halogens (X) and need to gain 1 e^1-

to become stable so one M^2+ combines with 2 X^1- to make

an ionic salt MX2

Answer:

Explanation:

Speed and velocity I think

Answer:

The fatty acids are mostly saturated.

Explanation:

Answer: The reaction of 1 mol of C to form carbon monoxide in the reaction 2 C(s) + O2(g) ( 2 CO(g) releases 113 kJ of heat. How much heat will be released by the combustion of 100 g of C according the the above information? According to the balanced chemical equation;

Explanation:

Answer:

The burning of fossil fuels contributes to the addition of greenhouse gases to the atmosphere. These gases trap thermal energy in the Earth's atmosphere.

Answer: Nonpolar Covalent Bond

Explanation: A Nonpolar Covalent Bond is created when atoms share their electrons equally. This usually occurs when two atoms have similar or the same electron affinity. The closer the values of their electron affinity, the stronger the attraction. This occurs in gas molecules; also known as diatomic elements.

Answer:

Co2(CO3)3

Hope this helps!!

For that you have to use the Aufbau principle

For example, writing the electronic configuration of Fe(28)

I recommend that you memorize the aufbau principle. Once you learn it, you don’t need anything else except the atomic number of the element to write it’s electronic configuration.

Answer:

25 percent

Explanation:

have a good day/ night

Answer:

25%

Explanation:

hope it helps

This problem is referring to an anhydrous salt that is derive from a hydrated Epson salt (magnesium sulfate hydrate) and the atom economy is required. However, not enough information is provided, yet we can use the attached file as a reference to provide a methodology of calculation.

To begin with, we need to calculate the [tex]x[/tex] which refers to the degree of hydration of the salt, so that we use the mass before and after heating the sample to figure out the grams and subsequently moles of water that are in there:

[tex]m_w=3.648g-1.782g=1.866g\\\\n_w=0.103molH_2O[/tex]

Next, since 1.782g corresponds to the anhydrous salt, we calculate the moles in such a amount:

[tex]1.782gMgSO_4*\frac{1molMgSO_4}{120.4gMgSO_4}=0.0148mol[/tex]

Then, we divide the moles of water by those of the anhydrous salt to calculte [tex]x[/tex]:

[tex]x=\frac{0.103mol}{0.0148mol} =6.96=7[/tex]

This means the formula of the hydrate is:

[tex]MgSO_4\ 7H_2O[/tex]

Finally, for the atom economy we just divide the molar mass of the anhydrous salt by that of the hydrate:

[tex]A.E=\frac{120.4g/mol}{246.47g/mol} *100\%\\\\A.E=48.8\%[/tex]

Learn more:

https://brainly.com/question/20796771

Answer:

How to Write the Net Ionic Equation for H2SO4 + MgCO3 = MgSO4 + H2O + CO2 -

A netionic equation also contains the spectator ions, whereas a net ionic equation just displays the chemical species that are involved in a process.

what is Net ionic equation?The net-ionic equation is a chemical equation that is used to express the condensed chemical reaction for a reaction that takes place in an aqueous solution. The ions involved in the production of a precipitate, water, or molecule are illustrated by the net-ionic equation. For precipitation, oxidation-reduction, and neutralization processes, net-ionic equations are frequently written.

H₂SO₄ (aq) + MgCO₃ (s) →H₂O (l) + CO₂(g) + MgSO₄(aq)

An ionic equation is a chemical equation in which the electrolytes in aqueous solution are stated as dissociated ions. It is similar to a molecular equation in which substances are described as molecules.

Learn more about the Net ionic equation with the help of the given link:

https://brainly.com/question/22885959

#SPJ2